Intercom Operation
56
To monitor a room through the
speakerphone of another sta-
tion:
1
Place an intercom call to telephone
you wish to monitor.
2 Press MUTE if you want to prevent
sounds in your room from being
heard at the monitored phone.
3 To end monitoring, hang up the
handset or press SPEAKER. The
remote station will disconnect imme-
diately.
Note: The remote phone must be
set to Intercom HANDSFREE. (See
page 54.)
The Room Monitoring feature allows you to acti-
vate the speakerphone of another station to
monitor sounds in that room. This feature is
especially useful in a nursery room or home
office where there are children present.
The remote station must be set to INTERCOM
HANDSFREE. When you call this phone on the
intercom, its speakerphone activates and
remains on, allowing you to hear sounds in that
room until you hang up.
To prevent sounds in your room from being
transmitted to the room you are monitoring, you
must press MUTE on your phone.
Monitoring a Room Using the Intercom
Press MUTE at your telephone to prevent
sounds in your room from being transmitted
to the room you are monitoring
To monitor sounds in another room,
place an intercom call to a station that
has been set to HANDSFREE
To Next Page
Loading...
