External Feature Module set
as a Music On Hold Adapter
1
Install External Feature Module.
2 Follow the instructions to set it as a
Music on Hold Adapter.
3 Connect a radio or continuous loop
recording to the Adapter.
External Feature Module set
as an External Paging Adapter
1 Install External Feature Module.
2 Follow the instructions to set it as a
External Paging Adapter.
3 Connect an amplifier and speaker to
the Adapter.
Additional Information
The Music on Hold Adapter enables you to eas-
ily provide music or a recorded message to
callers on hold.
The External Paging Adapter allows you to con-
nect an amplifier and speaker to your EPIC sys-
tem. This accessory is perfect for making
announcements in warehouses, outdoor loca-
tions or throughout an entire office.
Using Optional External Feature Module
66
To Next Page
Loading...
