Setting Line Buttons to Auto Seize Speakerphone/Headset
To choose whether the
Speakerphone or Headset will
be automatically seized when
you press a LINE button:
1
Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT
repeatedly, until ”Line But” appears
in the display, along with the current
setting.
3 Press the soft key under CHANGE if
you wish to change the Line Button
setting.
The choices are:
Line But:SPEAKER (factory setting)
Line But:HEADSET
4 Press PROGRAM to exit.
104
Additional Information
This feature allows you to choose whether the
Speakerphone or the Headset will be automati-
cally seized when you press a LINE button while
the handset is in the cradle.
To Next Page
Loading...