TMQ AP9 Autopilot (V6.0 - 965) Page 22 of 51 31/1/2017
· Rotate compass in the bracket if necessary until the arrow faces the bow of the
boat
· Route the cable to the AP9 control position
· Connect the compass cable wires to the internal connection strip of the AP9
marked T5 Remotes and T6 NMEA as follows:
· Red T5 Pin 1 10V
· Green T6 Pin 2 DATA1
· Yellow T6 Pin 4 IN1+
· Blue T6 Pin 3 NEG
Pin 3 and Pin 5 of compass are linked (NEG)
To Next Page
Loading...
