44
15. Communications
This software automatically sets the communication port and the data-transfer speed. The
transfer speed is automatically adjusted to the setting status of the connected DP-0206 unit.
- To initiate communications with the PC, select Remote
→ Connect from the menu.
- While the window below is displayed, the system is searching for a possible connection.
- If the memory information for the PC and in the unit is different, the dialog box below will appear.
- When transferring data from a PC to the unit, set the transfer direction to PC >> Unit. When
transferring data from the unit to a PC, set the transfer direction to Unit >> PC. You can also set a
different data transfer direction for each memory cell.
To Next Page
Loading...
Need help?
General
