20
9.6. Remote Control Equipment Connections
9.6.1. Manual muting terminal connections
If a no-voltage contact is connected, closing the contact allows the pre-determined input
channel volume to be reduced by a preset level of attenuation.
If a microphone with a contact is connected as shown in Connection (p. 12), the audio of
other channels will be muted for as long as the microphone’s talk switch is pressed.
9.6.2. Power remote terminal connections
If a no-voltage contact is connected, closing the contact allows the amplifier goes into power
saving mode. All of the indication will be turn off.
To Next Page
