TOMCAR TM2 - Equipment Modifications

SAFETY
Safe Operation Instructions
12
26. Never exceed the stated load capacity for the vehicle.
27. When either hauling cargo or pulling a trailer, reduce speed and follow the instructions in this manual.
28. The 4-point safety harness or the 3-point inertia safety belt reduce the risk of severe injury in case of a sudden stop or collision. The
appropriate restraint should always be worn for the activity at hand.
29. Arms and legs should always be kept inside the cab frame while the vehicle is in motion.
30. The parking brake should always be engaged before leaving the vehicle.
31. The foot pedal brake should always be engaged before releasing the parking brake.
32. The engine should be turned off before refueling. Make sure the refueling area is well-ventilated and free from sources of sparks or ame.
33. In order to prevent any unauthorized use or accidental start-up, always remove the ignition key when the vehicle is not in use.
We recommend that the operator always check all safety components before using TOMCAR
®
in order to ensure that TOMCAR
®
is in excellent
operating condition at all times.
Equipment Modications
Do not make any modications to your TOMCAR
®
vehicle.
Operating your TOMCAR
®
with modications other than those specically designed for TOMCAR
®
may result in failure of critical machine
components, especially those which increase speed or power. TOMCAR
®
may become aerodynamically unstable at speeds higher than those
for which it is designed and loss of control may occur at higher speeds. Such modications may also create a safety hazard, which could lead to
bodily injury.
The warranty on your TOMCAR
®
is terminated if any modications have been made to the vehicle or any equipment has been added to the
vehicle that increases its speed or power.