MAINTENANCE & LUBRICATION
96
Lights
Signal Lights Replacement
1.
Unscrew three screws at signal light surface.
2.
Install the new lamp.
3.
Screw back the screws.
NOTE:
Make sure the tab on the lamp locates properly in the housing.
Rear Lights
1 – Brake Light
2 – Parking Lights
3 – Signal Light
Rear Light Inspection
1.
Turn the ignition switch to the “ON” position.
2.
Depress the brake pedal and check the light.
3.
Turn on headlights via the lights control to the left of the steering wheel.
The parking light (2) should come on.
4.
Shift light control up (turn right). The signal light (3) should come on periodically.
Rear Light (RHS)
Signal Light
96
To Next Page
Loading...