OPERATIONS
Driving Proceedures
56
Driving Procedures
OPERATIONS
Driving Through Water
•
Driving the vehicle through water could result in the loss of vehicle control and may lead to serious injury or death.
•
Never cross deep or fast-owing water with your TOMCAR
®
.
•
After leaving water and then traveling on a level surface, always dry the brakes by applying light pressure to the brake pedal repeatedly
until braking action is normal.
Your TOMCAR
®
can operate through water up to a maximum recommended depth equal to your TOMCAR
®
’s oor level.
1.
Always determine water depths and current before entering.
2.
Choose a crossing where both banks have inclines that are as gradual as possible.
3.
Proceed slowly, avoiding rocks and any other obstacles that might be in your way.
NOTE:
After running your vehicle in water, it is critical that you perform the services outlined in the Periodic Maintenance Chart beginning on page 64.
Give special attention to engine oil, transmission oil, nal drive oil and all grease ttings.
Immersion can result in major damage if the vehicle is not serviced correctly and promptly. After immersion, always take the vehicle to your
service supplier. Do not start the engine!
NEVER DRIVE IN SEAWATER!
56
To Next Page
Loading...