TOMCAR TM2 - Gear Selector

To Next Page

To Previous Page

FEATURES AND CONTROLS

Gear Selector

High is the primary driving range for the TOMCAR

Low is intended for use where maximum power is required.

To change gears, always stop the vehicle and, with the

engine idling, move the lever to the desired gear.

Do not attempt to shift gears with the engine speed above idle

or while the vehicle is moving.

Always shut off the engine, remove the ignition key and place the

transmission in gear with the parking brake locked whenever the

vehicle is left unattended.

Maintaining shift linkage adjustment is important for proper transmission function. See your supplier if you experience any shifting problems.

Shifting into reverse should be with one swift motion, without stopping in the neutral position.

Do not attempt to shift the transmission while the vehicle is moving, or damage to the transmission could result. Always shift when the vehicle

is stationary and the engine is at idle. Make sure the lever is in the proper gear position.

H – High

N – Neutral

R – Reverse

N – Neutral

L – Low

2. Differential Lock

1. Gear Selector

FEATURES & CONTROLS