䕔
5-2
5.2 Durable years
This instrument is designed to be remain durable for 8
years when operated under the appropriate environment
and adequately inspected and serviced.
5.3 Inspection
䕔
When there is a problem, waveforms may not be
obtained correctly. Contact Tomey or our local
distributor immediately for repair or replacement.
䕔
Wipe the exterior of the instrument with a soft
cloth dampened with diluted neutral detergent
before transferring the instrument to Tomey
Corporation for maintenance and inspection.
Sterilize the measurement probes as described
in 5.4.1 c) before returning them.
䕔
Be sure to hold the connector when removing
the measurement probe from the main unit.
Holding and pulling the cord may damage the
inner core wires.
Check that the contact section of the measurement
probe is not damaged. Check that the connector is firmly
inserted and the cable is not damaged.
5.4 Routine maintenance
䕔
Hold the plug when disconnecting the power
cord from the outlet to avoid applying excessive
force on the cord. Pulling the cord may damage
the inner core wires, resulting in electric shock
or fire.
䕔
Do not use organic solvents such as thinner,
benzene, or acetone to clean the instrument and
accessories. These solvents may damage the
surface of the instrument.
To Next Page
Loading...
Need help?
General
