䕔
3-2
3.1.1 Precautions for installing the instrument
䕔
Install the instrument in a location free of water
or chemicals. Any water or chemicals entering
the instrument may cause an electric shock or
failure.
䕔
Do not install the instrument in a location where
chemicals are stored or gases may occur. Spilt
chemicals or vapor may enter the instrument
and result in fire.
䕔
Install the instrument in a location not subject to
direct sunlight, high temperature and humidity,
or air containing dust, salt, and/or sulfur.
Otherwise, failure or malfunction may occur.
䕔
Install the instrument in a leveled stable location
free of vibration or mechanical impact.
Otherwise, measurement cannot be conducted
correctly. Also, the instrument may topple over
or fall down, resulting in fire or a serious
accident.
䕔
Install the instrument so that the user can use
the system under optimal conditions. Carefully
connect the devices so that the wiring is not
disconnected unintentionally during operation,
and does not hinder operation of the instrument.