3-13
䕔
b) Connection for wireless communication
䕔
Check that both or either of the connected
devices is in new patient mode before starting to
communicate the patient information and
measurement data. Communication cannot be
started while both devices maintain the
information and measurement data of the last
patient.
䕔
When connecting a device with a USB cable
during wireless communicating, wireless
connection is changed to wired connection.
[Automatic connection upon startup]
Wireless communication automatically starts with the first device that establishes a
connection when this instrument is turned on. Refer to “3.7.2 c) Wireless Communication
Setting” for how to set “automatic connection upon startup.” Refer to the instruction manual
of each device for settings of the device.
To Next Page
Loading...
Need help?
General
