■
1-2
measured with the instrument that its measurement accuracy is
guaranteed. If incorrect measurement data is used to calculate the
degree of intraocular lenses, further surgery might be required.
■
When using the data taken by this instrument for refractive
correction surgery, thoroughly determine the selection by also
examining surgery methods and other inspections. Refractive
correction surgery conducted according to incorrect measurements
or analysis results may result in further surgery or severe
complication such as keratoectasia.
■
Precautions when installing the instrument and accessories
- Install the instrument in a location free of water or chemicals. Any water
or chemicals entering the instrument or devices may cause electric
shock or failure.
- Do not install the instrument in a location where chemicals are stored or
gases may occur. Any chemicals or vapor entering the device may result
in fire.
- Check the frequency, voltage, and allowable current (or power
consumption) of the power source. Otherwise, fire or electric shock may
occur.
- Connect the power plug to a grounded 3-pin outlet. Otherwise, a short
circuit due to failure of the instrument may result in electric shock.
- Do not place any heavy object on the power cord or compress the power
cord. Fire or electric shock may occur.
- Fully insert the power plug into the outlet. Faulty contact, allowing any
metal to contact the exposed terminal of the plug, or dust accumulated
on the exposed terminal of the plug may result in fire or electric shock.
- Conduct grounding work correctly. Otherwise, electric shock may occur.
Do not connect a device with data transmission specifications that are
not compatible. Fire or electric shock may occur. Contact Tomey
Corporation or your local distributor before using the instrument.
To Next Page
Loading...
Need help?
General
