Tomey CASIA2 - Page 13

1-5 ■
- When disconnecting cords, avoid applying too much force: for example,
do not hold and pull the cord.
- Refer to "5.4 Routine maintenance" and “5.6 Storing” for instructions on
the cleaning and storage of the instrument.
■ If any failure occurs in the instrument, immediately stop operation,
identify the failure in the instrument, and contact your local distributor
for repairs.
- Do not modify the instrument. Doing so may cause electric shock or
failure of the instrument. There is a high-voltage section in the
instrument. Touching this section will result in death or serious injuries.
- Disconnect the power cord from the outlet when replacing fuses.
Otherwise, electric shock may occur, resulting in death or serious
injuries.
- Use the power cord and fuses provided with the instrument or specified
by Tomey to ensure safety. Also, do not use the accessories provided
with the instrument for other equipment.
- Conduct regular inspections of the instrument and components.
- When the instrument is not in use for 1 month or longer, check that the
instrument is operating correctly and safely before restarting operation.
Refer to "5.3 Inspection" in this manual for the relevant procedures.