■
1-4
- Check that the date set in the instrument conforms to the actual
operation date and time.
■
Precautions during operation
- Do not place any container with liquid in it on the device.
Any liquid
entering the instrument may cause electric shock or failure.
- Always check that the device is operating correctly and monitor the
patient to ensure safety.
- If any problem is found concerning either the instrument or patient, take
appropriate action, such as stopping operation, to maintain patient
safety.
- When moving the head and/or chin rest of the measuring unit, pay
attention to the position of the patient's face, hands, and fingers.
Otherwise, movement of the head or chin rest may cause injury.
- Do not allow any person to place their hands or fingers in the clearance
under the head, the space immediately under the chin rest,
measurement window, or moving section. Hands or fingers may be
caught and injured.
- Do not allow the patient to touch the external connection terminal. Do
not lean on the instrument or press on the instrument from the top. The
instrument may topple over, resulting in mechanical failure or injuries.
- Peel off the top sheet of chin paper and clean the forehead pad with a
clean cloth before measuring the next patient.
Clean the forehead pad
and chin rest with a cloth dampened with alcohol as needed.
- If any smoke, offensive odor, or abnormal sound occurs, turn off the
instrument immediately, disconnect the power plug from the outlet, and
contact your local distributor or Tomey Corporation.
■
Precautions after operation
- Hold the plug when disconnecting the power plug from the outlet to
avoid placing excessive force on the cord. Pulling the cord may damage
the inner core wires, resulting in electric shock or fire.
To Next Page
Loading...
Need help?
General
