■
3-8
- When the measurement light enters the cornea,
sclera, conjunctiva or intraocular lens
perpendicularly, a bright line appears in the depth
direction.
- Ghost noise may occur in areas with strong
reflection such as cornea, sclera, conjunctiva and
iris.
(9) Change the scan type listed in the scan type list and repeat the steps.
(10) Output
When all measurements are completed for the scan types listed in the examination protocol,
tap the “Report” button to output the report. The sections required for the examination are
automatically analyzed and the Report screen appears. The data can be saved and output
from the Report screen.
■
When using the data taken by this instrument for
diagnosis or determination of treatment, proceed
carefully by taking measurements multiple times
and/or conducting other examinations.
■
When using this instrument to select intraocular
lenses, thoroughly determine the selection by
also examining cataract surgery methods and
performing other inspections. If incorrect
measurement data is used to select intraocular
lenses, further surgery might be required.
■
When using the data taken by this instrument for
refractive correction surgery, thoroughly
determine the selection by also examining
surgery methods and performing other
inspections. Refractive correction surgery
conducted according to incorrect measurements
or analysis results may result in further surgery
or severe complication such as keratoectasia.
To Next Page
Loading...
Need help?
General
