51
Exit Utility Menu
There are two methods for exiting the utility menu:
Saving and Exiting, Exiting without Saving. The
former saves all the changed settings before exiting,
and the latter exits the menu without saving any
changes.
Saving and Exiting
To save all utility menu option settings and to exit the
menu, press and hold down the UTIL button for a long
time. After this, the meter will exit the menu. Then
PuP and dEF will be performed and all settings will be
saved.
“Saving” means that corresponding settings will be
saved in the built-in non-volatile memory. Therefore,
data will not lose at the time of power-off and can be
used at the time of next power-on.
Exiting Without Saving
If user decides to exit the utility menu without saving
the optional settings, and gives up the operation of
“PuP” and “dEF”, it can be done by simply pressing
To Next Page
Loading...
