@ToolkiRC 2024
output PWM will automatically change at 3 different
speeds.
The width can be set from 800 to 2200us.
The cycle can be set between: 2.5ms (400Hz) to
50.0ms (20Hz). As shown below:
Select PPM, press [▲▼button] to move the cursor
to the value of the channel to be modified. Press [●
button] to modify the output pulse width value of this
channel. As shown below:
Select SBUS, press [▲▼button] to move the cursor
to the value of the channel to be modified. Press [●
To Next Page
