Topcon DIGISTAR TMR4610 - Change Feeding Number; Clear Scale Memory

26 TMR4610 Operators Manual D4208-EN
11.3 Change Feeding Number
11.4 Clear Scale Memory
1. Press .
2. Enter user number.
3. Press .
4. Enter feeding number (1-9).
5. Press .
1. To clear scale memory enter D.A.N.
8201, then press . Message will
be displayed;
On=Clear, Clear=Reuse, Net=exit
Press to erase feeding memory.
Press to reuse feeding.
Press to exit
Advance Commands