Topcon DIGISTAR TMR4610 - 8 Operation; Turn on Scale; Zero Balance Indicator

12 TMR4610 Operators Manual D4208-EN
8.0 OPERATION
8.1 Turn on Scale
8.2 Zero Balance Indicator
1. Press .
HELLO
1. Enter User ID Number if required.
2. Press .
1. Press and hold for three
seconds to zero balance scale.
2. Flashing arrow on side of display
points to gross next to the display
window, scale is ready to weigh.
Operation
0 lb
11:58A 23NO 16
PRESS RECIPE TO LOAD
2
ENTER USER ID ON KEYPAD
AND PRESS ID KEY TO USE
SCALE
0
11:58A 23NO 16
PRESS RECIPE TO LOAD