Topcon DIGISTAR TMR4610 - Ingredient Tolerance; Pen Tolerance; Batch Advance Delay

32 TMR4610 Operators Manual D4208-EN
12.4 Ingredient Tolerance
Sets weight “window” to accept loaded weight before auto advance.
12.5 Pen Tolerance
12.6 Batch Advance Delay
Changes time indicator, waits before automatically advancing to next ingredient.
1. Enter 6003 and press . Press
again to choose desired
percentage off, or any entered using
the keypad.
2. Press .
Note: OFF setting always advances after
ingredient amount reached.
1. Enter 6005 and press . Press
again to choose weight or percent
2. Press , screen will display pentol.
3. Enter weight or percentage desired.
4. Press .
1. Enter 6008 and press . Press
again to select delay time or enter
delay time using key pad.
2. Press .
Note: Set to Manual prevents automatic
advance.
Commonly Used Direct Access Numbers
(D.A.N.)
6003
3:02P 30JAN 17
PRESS REICPE TO LOAD
6005
3:02P 30JAN 17
PRESS RECIPE TO LOAD
6008
3:02P 30JAN 17
PRESS RECIPE TO LOAD