13
Introduction
• Battery level (not displayed on menu screens)
Displays the current power level of the battery.
: Level 3: Full power.
: Level 2: Plenty of power remains.
: Level 1: Half or less power remains.
: Level 0: Little power remains. Charge the battery.
: Low: No power remains (A beep tone sounds and the
battery symbol blinks.) Charge the battery. Operation
cannot be performed. After a short time the instrument
automatically powers off.
• Measurements
The following symbols are displayed.
: Staff reading (height)
: Horizontal distance to staff
: Height difference
:Elevation
The fractional/decimal display format for measurement value,
calculation value and input value depends on the settings in
measuring mode and fractional/decimal representation of height
units. (See "16. Changing the Settings".)
• When the fractional/decimal display format is set to "0.0001m" and
the unit of measurement is "m", the display is as follows:
When measuring mode is "Single",
"Average" or "Repeat"
Height: Up to 4 decimals
Distance: Up to 2 decimals
When measuring mode is "Tracking"
Height: Up to 3 decimals
Distance: Up to 1 decimal
DL502-503.book 13 ページ ２０１０年４月５日 月曜日 午前９時４７分
To Next Page
Loading...
Need help?
General
