Topcon IS01 - Page 153

151
17 MESSAGE/ERROR DISPLAYS
• If error still persist after attempting to clear them, contact your local Topcon dealer or Topcon head
office.
Adjust Axis mode set Error
-----
Close the program and restart the in-
strument.
If this error code is consistently dis-
played, repair is required.
Adjust Axis Read Error
-----
Adjust Axis Set Error
-----
Angle Turn Set Error
-----
Adjust Axis range Error.(1)
-----
Adjust Axis dist Error.(2)
-----
Adjust Axis f/r diff Error.(3)
-----
Adjust VAxis std div Error.(4)
-----
Adjust HAxis std div Error.(5)
-----
Bluetooth mode change error
(Trn mode)
-----
Bluetooth mode change error
(Command mode)
-----
Bluetooth local device name get error
-----
Bluetooth pincode get error
-----
Bluetooth pincode set error
-----
Bluetooth security get error
-----
Bluetooth security set error
-----
There is no response from Bluetooth module
-----
There is no response from SSWireless module
-----