Topcon IS01 - Page 157

155
18 SPECIFICATIONS
Laser class for distance measurement : Class 1(IEC Publication 825)
: Class I(FDA/BHR 21 CFR 1040)
Atmospheric Correction Range : –999.9 ppm to +999.9 ppm, in 0.1 ppm increments
Prism Constant Correction Range : –99.9 mm to +99.9 mm, in 0.1 mm increments
Coefficient Factor : Meter / Feet
International feet 1meter = 3.2808398501 ft.
US SURVEY feet 1meter = 3.2808333333 ft.
Electronic Angle Measurement
Method : Absolute reading
Detecting system :
Horizontal : 2 sides
Vertical : 2 sides
Minimum reading
IS 01
: 1"/0.5" (0.5mgon/0.1mgon, 5mmil/2mmil) reading
IS 03
: 5"/1" (1mgon/0.2mgon, 20mmil/ 5mmil) reading
Accuracy(Standard deviation based on DIN 18723)
IS 01
: 1"(0.3mgon)
IS 03
: 3"(1.0mgon)
Diameter of circle : 71 mm
Tilt Correction
Type : Automatic vertical and Horizontal index
Method : Liquid type
Compensating Range : ±6'
Correction unit : 1"(0.1mgon)
Computer unit
Microprocessor : Intel PXA255
Processor speed : 400MHz
Operating system : Microsoft Windows CE.NET 4.2
Memory : 128MB / RAM
2MB Flash ROM
1GB micro SD Card
Display
LCD : 3.5 inch TFT color LCD
(240x320 dots)
Touch panel : Electrical analog resistor thin film system
Bluetooth Unit
Bluetooth Communication distance : About 5m
(The range will be different by a condition)
Bluetooth Standard : V1.2
Bluetooth Transmitting : Class2 (10mW or less)
Wireless function
Communication distance : About 1000m
(Distance may vary due to obstruction between the
communication instruments or communication status)
Communication output : 100mW or less
Interface
Based on RS-232C (6 pin)
Based on CompactFlash (Type I/II)*
*CompactFlash is a trademark of SanDisk corporation.
USB : Type miniB Rev.1.1(Active Sync)
Type A Rev.1.1(USB Memory)
®
®
®
®
®
®