Topcon RL-H2Sa - Page 29

27
3 When the sensor signals “on-grade”, secure its position.
4 Press the ENT key. The display will change to “POS 2”.
Note
• When the instrument has auto-leveled, the “POS 1” will stop flashing.
ＭＡＮＵ
ＰＯＷＥＲ
ＯＮ
ＥＮＴ
Ｙ
Ｘ
ｒｐｍ
１００
×
％
％
Move Level Sensor Up
or Down Until Beam is
Detected.
ＭＡＮＵ
ＰＯＷＥＲ
ＯＮ
ＥＮＴ
Ｙ
Ｘ
ｒｐｍ
１００
×
％
％
When Beam is
Detected, Fix Level
Sensor.
50m (160 feet)
50m (160 feet)
PRESS
ENTER