Topcon RL-H2Sa - Laser Safety; Laser Safety Labels

6
Laser Safety
This product uses a invisible laser beam, and is manufactured and sold in accordance with
“Performance Standards for Light-Emitting Products” (FDA/BRH 21 CFR 1040) or “Radiation
Safety of Laser Products, Equipment Classification, Requirements and User’s Guide” (IEC
Publication 825) provided on the safety standards for laser products.
As per the said standard, this product is classified as a “Class 3A (IIIA) Laser Product”.
This is a simple product to operate and does not require training from a laser safety officer.
In case of any failure, do not disassemble the instrument. Contact TOPCON or your TOP-
CON dealer.
Labels
POWER
MANU
ON
ENT
X
Y
RL-H2Sa
x100
rpm
AVO ID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
DANGER
CLASS a LASER PRODUCT
AVOID DIRECT EYE EXPOSURE
LASER RADIATION
WAVE LENGTH 685nm
5mW MAXIMUM OUTPUT
CLASS3A LASER PRODUCT
DO NOT STARE INTO BEAM
LASER RADIATION
Maximum output5mW Wave length 685nm
Labels are differed by the market.
Beam aperture