86
MAINTENANCE
FUSE CHANGE
1 Make sure that the power switch of the main body is off and the power cable is off.
2 Remove the fuse holder by rotating it counterclockwise by a screwdriver.
3 Replace the fuse with the attached one.
4 After inserting, rotate the fuse holder clockwise by a screw driver while pushing it lightly.
WARNING
To avoid electric shocks during fuse change, be sure to unplug
the power cable before removing the fuse lid.
Also, do not plug the power cable leaving the fuse box open.
WARNING
Always use the attached fuse (3A 250V). Using any other type
may cause troubles and fire.
To Next Page
Loading...
