87
MAINTENANCE
MAINTENANCE
CLEANING THE DUST COVER
1 If the dust cover, control panel, etc. get soiled, wipe the surface with dry cloth.
2 If the dust cover is noticeably stained, wipe the surface with a cloth which is moistened in
a tepid water solution of neutral detergent for food and then squeezed out.
USER MAINTENANCE
To maintain the safety and performance of the instrument, unless performed by an authorized
service engineer, never attempt to perform maintenance of items other than those specified
herein.
For details about maintenance, read the description of this manual.
NOTICE
• Avoid cleaning plastic parts with solvents. Benzine, thinner, ether
an gasoline may cause discoloring and decomposition.
To Next Page
Loading...
