45
When you select the Race Marking, you will get to the race list table to select the specific
race you want to mark. After select the race, you will go to the marking page. The upper
side is the Race Information of Race Code, Liberation site and Liberation Date and
Time.
In the lower side there is the Race Marking window which will guide you throughout the
race marking process. The process will be as follows:
1. Press RED Start button to start the marking process. The middle message will prompt
“Waiting…”
2. You can start basketing/marking your birds for the race continuously.
3. When you finish the basketing/marking process, press Stop to finish this fancier’s
basketing/Marking process.
4. The Print button then will activate to green color. A reminder window also popup to
ask you to print the basketing/Marking report. You MUST print after finished the
basketing/Marking process.
5. In case you did not connect to a printer, the display will show you “Print Failed”.
Then you press OK and the process will proceed.
6. After printing the Basketing/Marking report, a Pigeon button will be activated to green
color where you can check your birds that have been marked. A search window can
help you to find the bird if you have too many birds in this marking.
To Next Page
Loading...
