6.1- USE OF THE ACTUATOR
THE ACTUATOR CAN BE USED EXCLUSIVELY BY AN USER ACTING IN COMPLIANCE
WITH THE INSTRUCTIONS CONTAINED IN THIS MANUAL AND/OR IN THE MANUAL OF
THE ACTUATOR CONTROL DEVICE (e.g.: WIND AND RAIN CONTROL UNIT).
BEFORE USING THE ACTUATOR, IT IS COMPULSORY FOR THE USER TO READ AND
UNDERSTAND IN ALL ITS PARTS THIS MANUAL, AS WELL AS THE EVENTUAL MANUAL
OF THE INSTALLED CONTROL DEVICE TYPE.
BEFORE OPERATING THE ACTUATOR, THE USER MUST COMPULSORILY VERIFY THAT
NEAR AND/OR UNDER THE WINDOW THERE ARE NOT ANY PERSON, ANIMAL AND
THING WHOSE SAFETY MAY BE ACCIDENTALLY JEOPARDISED (SEE PAR. 4.4).
DURING THE OPERATION OF THE ACTUATOR CONTROL DEVICE, THE USER HAS TO
COMPULSORY OCCUPY A SAFE CONTROL POSITION ASSURING VISUAL CONTROL ON
THE WINDOW MOVEMENT.
IT IS COMPULSORY TO VERIFY CONSTANTLY IN TIME THE FUNCTIONAL EFFICIENCY
AND THE RATED PERFORMANCE OF THE ACTUATOR, OF THE WINDOW FRAME WHERE
IT IS INSTALLED AND OF THE ELECTRIC PLANT, PERFORMING WHEN NECESSARY
INTERVENTIONS OF ROUTINE OR SUPPLEMENTARY MAINTENANCE ASSURING
OPERATION CONDITIONS COMPLYING WITH SAFETY REGULATIONS.
ALL ABOVE MENTIONED MAINTENANCE INTERVENTIONS CAN BE PERFORMED ONLY
BY COMPETENT AND QUALIFIED TECHNICAL PERSONNEL MEETING THE
PROFESSIONAL AND TECHNICAL REQUIREMENTS FORESEEN BY THE LAW IN FORCE
IN THE COUNTRY OF INSTALLATION.
The use of the actuator allows to control automatically the opening and closing of the
window according to the type of control device installed (see par. 5.6).
27
INSTALLATION AND USE ISTRUCTIONS
VER.0.0
REV.09.13
USE AND OPERATION -6
C20
To Next Page
Loading...
Need help?
General
