9.1- GENERAL INSTRUCTIONS
THE USE OF “NON-ORIGINAL” SPARE PARTS AND ACCESSORIES WHICH MAY
ENDANGER THE SAFETY AND THE EFFICIENCY OF THE ACTUATOR IS FORBIDDEN.
THIS ACTION SHALL INVOLVE THE WARRANTY EXPIRATION.
ORIGINAL SPARE PARTS AND ACCESSORIES HAVE TO BE REQUESTED EXCLUSIVELY
TO YOUR DEALER OR TO THE MANUFACTURER STATING TYPE, MODEL, SERIAL
NUMBER, AND YEAR OF CONSTRUCTION OF THE ACTUATOR.
IN CASE OF REPLACEMENT OF THE POWER SUPPLY CABLE, IT IS NECESSARY TO USE
A CABLE TYPE HOS-VVF 3 x 0.75.
THE REPLACEMENT CAN BE PERFORMED EXCLUSIVELY BY COMPETENT AND
QUALIFIED TECHNICAL PERSONNEL MEETING THE PROFESSIONAL AND TECHNICAL
REQUIREMENTS FORESEEN BY THE LAWS IN FORCE IN THE COUNTRY OF
INSTALLATION.
BRACKETS FOR VERTICAL ASSEMBLY9.2 -
SPARE PARTS AND ACCESSORIES UPON REQUEST -9
C20
29
VER.0.0
REV.09.13
INSTALLATION AND USE ISTRUCTIONS
Fig. 15Fig. 14
To Next Page
Loading...
