EasyManua.ls Logo

Torishima Pump MML User Manual

Torishima Pump MML
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instruction
MML
High Pressure Centrifugal Pump
PT. TORISHIMA GUNA INDONESIA
Question and Answer IconNeed help?

Do you have a question about the Torishima Pump MML and is the answer not in the manual?

Torishima Pump MML Specifications

General IconGeneral
CategoryWater Pump
TypeMML
ModelMML
MaterialCast Iron, Stainless Steel, Duplex Stainless Steel
ApplicationWater Supply, Irrigation, Industrial, Fire Protection

Summary

I. Introduction

2. General construction of pump

2.1. Description of pump

Details pump types, size designation, and construction.

2.2. Driver

Explains pump driver connection, rotation, and types.

2.3. Mode of operation of pump

Describes fluid flow and axial thrust balancing mechanism.

3. Erection

3.1. Erection the pump

Covers foundation, leveling, alignment, grouting, and piping.

3.2. Fitting and dismantling the coupling

Details coupling alignment, fitting, and removal procedures.

3.3. Instrumentation

Recommends pressure gauges for supervision.

3.4. Piping

Covers suction and discharge piping requirements and considerations.

3.5. Valves and fittings

Describes valves in suction and discharge lines.

4. Operating instructions

4.1. Commissioning and starting up the pump

Lists checks before and steps for starting the pump.

4.2. Supervision during running

Outlines checks and monitoring during pump operation.

4.3. Shutting down the pump

Steps for safely stopping the pump.

4.4. Maintenance

Covers pump, stuffing box, mechanical seal, bearing, and balancing device maintenance.

4.5. Operating troubles causes and remedies

Lists common issues and their solutions.

5. Dismantling and reassembling the pump

5.1. Dismantling

Procedures for disassembling pump components.

5.2. Reassembly

Steps for reassembling the rotating assembly and pump.

5.3. Protection of pump during prolonged shut downs and transport

Guidance on protecting the pump during storage or transit.

6. Spare parts

7. Stub shaft dimensions, packing details, cooling water and oil requirements, bearing details, seals gaskets and O-rings.

9. Sectional drawings and list of components

Related product manuals