EasyManuals Logo

Tornado 99685 User Manual

Tornado 99685
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
STARTING THE MACHINE
1. Press the brush motor switch (2).
2. The signal lamp of the battery charge level
(1) will come on. Check that it is in green color.
If the red color appears, it is necessary to
proceed for the batteries' recharge (see under
“BATTERIES RECHARGING”).
3. Press the suction motor switch (3).
4. Acting upon the solution valve lever (6)
adjust the solution detergent quantity bringing
the floor uniformly wet, avoiding the leakage
of detergent from the splash guard. Always
consider that the correct quantity of solution
detergent depends on the type of floor,
dirtiness and machine speed.
5. Acting upon this lever, the indicator on the
instrument board of the open solution valve (4)
will turn on.
6. Acting upon the brush base lifting pedal (8)
lower the brush base.
7. Acting upon the squeegee lifting lever (7)
lower the squeegee.
8. Activating the levers (5) the brush will start
rotating transferring to the machine a forward
movement. The squeegee will start drying the
floor.
9. During the first meters check that the
detergent solution flow is appropriate and that
the squeegee adjustment guarantees a perfect
drying action.
ADJUSTMENT OF THE BRUSHES PRESSURE
Through the register (1) placed on the internal
part of the front right wheel, it is possible
to adjust the brushes pressure on the cleaned
surface.
By turning the wing nut clockwise the pressure
increases, rotating the wing nut
counterclockwise, the pressure decreases.
This device allows a more efficient cleaning
action also on very difficult and dirty surfaces.
OVERFLOW DEVICE
In order to avoid serious damages to the
suction motor, the machine is equipped with a
float that intervenes when the recovery tank is
full, closing the suction hose and stopping the
suction.
1. When this happens, it is necessary to empty
the recovery tank.
2. Hold the drain hose placed in the front part
of the machine.
3. Take off the drain plug acting upon its lever
and empty the recovery tank into appropriate
containers, according to the standard norms
for the liquid disposal.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tornado 99685 and is the answer not in the manual?

Tornado 99685 Specifications

General IconGeneral
BrandTornado
Model99685
CategoryScrubber
LanguageEnglish

Related product manuals