20
MATERIAL CHARACTERISTICS
PPL
(Polypropylene)
Good wear resistance. Maintains characteristics with hot water up to 122°F
(50°C). It is not hygroscopic.
NYLON Excellent wear resistance, even with hot water. It is hygroscopic.
BRISTLES
THICKNESS
Thicker bristles are more rigid and must be used on smooth floor or
floor with small joints. On irregular floors with deep joints or relieves,
it is recommended to use softer bristles which penetrate more easily
and deeper. Please be aware that when brush bristles are worn out and
therefore too small, they become rigid and unable to penetrate and clean
deeper. This may also happen with thicker bristles creating brush vibration.
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types
of brushes.
CODE QTY DESCRIPTION
K57621710 2 Cylindrical brush nylon 0,6 Ø 95x462
48901210 2 Cylindrical brush PPL 0,4 Ø 95x462
K57621720 2 Cylindrical brush PPL 0,3 Ø 95x462
48901230 2 Cylindrical brush nylon 0,3 Ø 95x462
To Next Page
Loading...
