Tornado 99685 User Manual

17
CLEANING OF SOLUTION TANK AND FILTER
FRONT SQUEEGEE RUBBER REPLACEMENT
Check the wear of the squeegee rubber and
eventually replace it.
For the replacement it is necessary to:
1. Take off the squeegee hose (3) from its
coupling.
2. Disassemble the squeegee from the support
rotating the lever (2) counterclockwise and
sliding the stud bolts (1) in their slots.
3. Uncouple the hook (1) of the rubber holder
blade, release the extremities (2) from the
squeegee body and take off the rubber (4).
1. Bring the machine to an appropriate place
for tanks draining.
2. Unscrew the solution tank cap (1).
3. Unscrew the exhaust plug (2).
4. If the machine is equipped with the optional
device of the solution drainage, it is sufficient
to open the solution valve of the device (see
under "EMPTYING DEVICE DETERGENT
SOLUTION").
5. Rinse the solution tank with a water jet.
6. Rinse the solution tank filter placed inside
the exhaust plug, under the machine.
7. Reassemble all parts and close, if present,
the solution valve of the drainage device.
TWO-MONTHLY MAINTENANCE
4. Unscrew the wing nuts (5) in the upper part
of the squeegee.

Tornado 99685 Specifications

General

Brand	Tornado
Model	99685
Category	Scrubber
Language	English