Product Overview
Figure 2
1. Traction pedal 6. Charge indicator
2. Brake pedals 7. Engine oil pressure warning
light
3. Pedal locking latch 8. Engine coolant
temperature warning
light
4. Tilt steering lever 9. Glow plug indicator light
5. Parking brake latch
10. Temperature gauge
Controls
Note: Deter mine the left and right sides of the
mac hine from the nor mal operating position.
T his machine pr oduces sound lev els in
ex cess of 85 dB A at the operator s ear and
can cause hearing loss thr ough extended
periods of exposur e.
W ear hearing pr otection when operating
this machine.
Traction Pedal
T he traction pedal ( Figure 2 ) controls forw ard and
rev erse operation. Press the top of the pedal to
mo v e forw ard and the bottom to mo v e bac kw ard.
Ground speed de pends on ho w far y ou press the
pedal. F or no load, maxim um g round speed, fully
press the pedal while the throttle is in F ast.
T o stop , reduce y our foot pressure on the traction
pedal and allo w it to retur n to the center position.
Important: T he speed limiter scr ew must
stop the traction pedal bef or e the pump
r eaches full str ok e or dama ge to the pump
may occur .
Brake Pedals
T w o foot pedals ( Figure 2 ) operate indi vidual
wheel brak es for tur ning assistance , parking, and
to aid in obtaining better side hill traction. A latc h
connects the pedals for parking brak e operation
and transpor t.
Pedal Locking Latch
T he pedal loc king latc h ( Figure 2 ) connects the
pedals tog ether to eng ag e the parking brak e .
Tilt Steering Lever
Press the lev er ( Figure 2 ) do wn to tilt the steering
wheel to the desired position. T hen release the
lev er to loc k the adjustment.
Parking Brake Latch
A knob on the left side of the console actuates
the parking brak e loc k ( Figure 2 ). T o eng ag e the
parking brak e , connect the pedals with the loc king
latc h, push do wn on both pedals , and pull the
parking brak e latc h out. T o release the parking
brak e , press both pedals until the parking brak e
latc h retracts .
Charge Indicator
T he c harg e indicator ( Figure 2 ) illuminates when
the system c harging circuit malfunctions .
Engine Oil Pressure Warning Light
T he light ( Figure 2 ) illuminates when the engine
oil pressure is dang erously lo w .
Engine Coolant Temperature Warning
Light
T he light ( Figure 2 ) illuminates and the engine
shuts do wn when coolant reac hes an ex cessi v ely
high temperature .
16
To Next Page
Loading...
