Toro 30411 - Page 9

100-5623
1. Low height of cut
adjustment
2. High height of cut
adjustment
100-5624
1. Height of cut adjustment
100-5693
1. Height of cut adjustment
100-6578
1. Entanglement hazard, belt—do not operate the machine
with the shields or guards removed; always keep the shields
and guards in place; stay away from moving parts.
100-5622
1. Height of cut adjustment
100-5623
1. Low height of cut
adjustment
2. High height of cut
adjustment
100-5694
1. Height of cut adjustment
104-3578
1. Height of cut adjustment
9