SPECIFICATIONS
1.19
1.19
TRANSMISSION SYSTEM
Drive Type:
Pump:
Wheel Motors:
Differential Lock:
Drive:
Relief Valve Setting:
CUTTERHEAD DRIVE SYSTEM
Drive Type:
Pump:
Delivery Rate:
Cutterhead Motors:
Control:
Relief Valve Settings:
Hydraulic.
Variable displacement hydraulic piston pump with integral charge
pump servo assisted.
Front Axle - ‘Twin Lock’ Radial piston, fixed displacement, with
integral disc brake (pressure released).
Rear Axle - Radial piston, fixed displacement.
Electro - hydraulic control valve with pedal control (only avail-
able in ‘Work’ mode).
Four wheel drive in ‘Work’ and ‘Transport’ modes.
Main service relief 350 bar (5075 psi) differential.
Charge pressure relief 29 bar (421 psi) differential.
Hydraulic.
Tandem hydraulic gear type.
31 Litres per minute. (each circuit)
Hydraulic gear type, reversible, pressure balanced with integral
differential pressure sensing relief check valve. Direct drive.
Electro-hydraulic.
Automatic diverter valve safety cut-off.
250 bar (3625 psi) differential.
To Next Page
Loading...
Need help?
General
