GRASS CUTTING FAULTS
1.67
1.67
FAULT
POSSIBLE CAUSE
REMEDY
GRASS CUTTING FAULTS Continued.
Excessive bottom blade
wear..
Bottom blade in heavy
ground contact.
Cutting edges of the cutting
cylinder/bottom blade
are rounded.
Cylinder is in heavy
contact with the bottom
blade.
Damaged cutting cylinder or
bottom blade.
Excessively abrasive ground
conditions.
Raise height of cut.
Backlap or regrind to restore
cutting edges.
Readjust the cutting cylinder to
the bottom blade.
Regrind or replace as necessary.
Raise height of cut.
To Next Page
Loading...
