OPERATING THE MOWER
1.35
1.35
TRANSMISSION NEUTRAL INDICATOR LIGHT
Illuminates when the travel control pedal is in the
neutral position and the ignition key is turned to position ‘I’.
Note: The parking brake must be engaged for the transmission neutral indicator light
to illuminate.
CUTTERHEAD DRIVE SWITCH INDICATOR LIGHT
Illuminates when the cutterhead drive switch is in the ‘off’ position and the ignition
key is turned to position ‘I’.
PARKING BRAKE INDICATOR LIGHT
Illuminates when the parking brake is engaged and the ignition key is turned to posi-
tion ’I’.
HYDRAULIC RETURN FILTER INDICATOR LIGHT
Illuminates when the return filter element is blocked.
Note: The engine must be running for the hydraulic return filter indicator light
to illuminate. The indicator light may illuminate briefly when the hydraulic oil
is cold.
HYDRAULIC TRANSMISSION FILTER INDICATOR LIGHT
Illuminates when the transmission filter element is blocked.
Note: The engine must be running for the hydraulic return filter indicator light
to illuminate. The indicator light may illuminate briefly when the hydraulic oil
is cold.
Illuminates when the transmission system ‘work’ mode is selected and the ignition
key turned to position ‘I’
To Next Page
Loading...
Need help?
General
