SPECIFICATIONS
1.21
1.21
Wheel Nut Torque Setting: Front axle 200Nm
Service Brakes: Closed loop hydrostatic service braking operating on front wheels only.
Parking Brake: Lever operated oil immersed disc brakes on front wheels only. Pressurised hydraulic oil
release with mechanical override for emergency towing purposes.
Ground Clearance: 180mm at 13mm cut height and with cutterheads raised.
Steering: Hydrostatic rear wheel steering, emergency manual steering.
Features: Tilting operator platform.
Lockable engine cover.
Adjustable suspension seat with folding arms.
Adjustable steering column.
Cutterhead parking latches with safety locks.
Backlapping facility.
Differential lock.
Engine coolant and hydraulic oil overheat audible warning (horn).
Variable cutterhead weight transfer/traction assistance.
Four wheel drive in ‘Work’ and ‘Transport’ modes.
Hydraulic oil filter blocked telltales on control panel.
Wing arm breakback.
Safety Features: Neutral start interlock on transmission pump, parking brake and
cutterhead drive switch.
Operator presence control (seat switch).
VEHICLE SPECIFICATIONS
Travel Speed:
0-25 km/h (0-15 mph) forward.
0-11 km/h (0-7 mph) reverse.
Tyres Tyre Type
Front axle
Rear axle
0.7 bar
(10 psi )
0.7 bar
(10 psi).
1.4 bar
(20 psi)
1.4 bar
(20 psi)
Recommended Tyre Pressures
Turf Conditions
Max Pressure
Road Conditions
26 x 12 - 12 4 ply
Trelleborg turf pattern.
20x10.0-8 4 ply
Dico turf pattern.
1.7 bar
(25 psi)
1.7 bar
(25 psi)
Rear axle 54Nm
To Next Page
Loading...
Need help?
General
