WARNING : PREVENT ACCIDENTS - Ensure that the mode elected is appropriate to the mode of
operation of the machine.
Select ‘Work’ mode when operating the mower in conditions of poor traction when maximum tractive
performance is required. Selecting ‘Work’ mode will enable the use of the differential lock.
Select ‘Transport’ mode when operating the mower in conditions of good traction. For example when
travelling on the public highway or mowing large, level, open areas. Selecting ‘Transport’ mode in these
conditions will reduce transmission system wear and tear.
Differential lock is not available for use when ‘Transport’ mode is selected.
1. Transport Mode
2. Work Mode
OPERATING THE MOWER
1.28
1.28
TRANSPORT LATCHES
WARNING : PREVENT ACCIDENTS - ALWAYS raise the
cutterheads to the transport position and secure with the transport
latches and safety locks when travelling between work areas.
Front and Wing cutterhead transport latches:
Centre cutterhead transport latch:
WARNING : PREVENT ACCIDENTS - Stored energy devices are
charged when the outer wing units are in the transport position.
Always operate the relevant lift controls to provide hydraulic support
for the cutterhead suspensions before attempting to release the trans-
port latches.
1.
2.
1. Transport latch.
2. Safety lock.
WORK/TRANSPORT MODES
1
2
To Next Page
Loading...
Need help?
General
