HYDRAULIC SYSTEM
4-16 Z580/Z593/Z595 Diesel Service Manual
4
32. Tighten the 2 pump pulley set screws. Torque to
12.1 + 1.6 in-lbs. (1.37 + 0.18 Nm) (Fig. 294).
34. Using a spring removal tool (Toro part no. 92-5771),
install the pump idler arm spring (Fig. 296).
Fig 294 PICT-3349a Fig 296 PICT-3185
35. Install the right and left rear wheels.
36. Install the front engine shield (Fig. 297).
33. Install the pump drive belt (Fig. 295).
Fig 297 IMG_7862
Fig 295 PICT-3187
To Next Page
Loading...
