SPECIFICATIONS
2-2 Z580/Z593/Z595 Diesel Service Manual
2
Specifi cations Z593-D & Z595-D cont.
Mowing Deck
Z593-D Pro Performance Z595-D Pro Performance
Type TURBO FORCE™ TURBO FORCE™
Deck Construction Fabricated, 7-ga Steel
w/Bull-Nose bumper
Fabricated, 7-ga Steel
w/Bull-Nose bumper
Deck Material High-Strength Steel High-Strength Steel
Deck Depth 5-1/2” (13.97cm) 5-1/2” (13.97cm)
Adjustable Discharge Baffl e Standard Standard
Spindle Housings 9-3/8” (23.8cm) Diameter Cast Iron 9-3/8” (23.8cm) Diameter Cast Iron
Spindle Shaft / Bearings 1” (2.54cm) Steel Shaft/Tapered Roller 1” (2.54cm) Steel Shaft/Tapered Roller
Blades (3) 1/4” (.635cm) Heat Treated Steel 1/4” (.635cm) Heat Treated Steel
Blade Tip Speed 18,500 ft/min (5,638.8 meters/min) 18,500 ft/min (5,638.8 meters/min)
Belt Construction Aramid Fiber V-Belt Aramid Fiber V-Belt
Enhanced Belt Wrap Minimizes Belt Slip Minimizes Belt Slip
Discharge Chute 5/16” (.79cm) Rubber 5/16” (.79cm) Rubber
Cutting Height 1-1/2” - 5” in .25” increments
(3.81 - 12.7cm in .635cm increments)
1-1/2” - 5” in .25” increments
(3.81 - 12.7cm in .635cm increments)
Anti-Scalp Rollers - 52”
Anti-Scalp Rollers - 60” / 72”
6 Standard
6 Standard
5 Standard
6 Standard
Carrier Frame Construction 2” x 2” x 3/16” (5.08 x 5.08 x .48cm) 2” x 2” x 3/16” (5.08 x 5.08 x .48cm)
To Next Page
Loading...
