Toro Diesel Z Master - Page 134

HYDRAULIC SYSTEM
4-47Z580/Z593/Z595 Diesel Service Manual
4
3. Install 2 bolts, washers and nuts to secure the reser-
voir to the hydraulic tank bracket (Fig. 393).
5. Position the hose clamp to secure the oil cooler hose
to the tank fi tting barb (Fig. 395).
Fig 393 PICT-3409
Fig 395 PICT-3396a
6. Install the hydraulic fi lter hose to the fi tting on the
bottom of the hydraulic reservoir (Fig. 396).
4. Install the oil cooler hose onto the tank fi tting on the
bottom of the hydraulic reservoir (Fig. 394).
Fig 396 PICT-3401a
Fig 394 PICT-3397a