ENGINE
5-37Z580/Z593/Z595 Diesel Service Manual
5
51. Position the 2 harness R-clamps to the inside of the
front panel on the bottom radiator plate assembly.
Install a bolt and nut securing each R-clamp (Fig.
544).
Fig 544 PICT-3549
52. Plug the harness into the fan connector (Fig. 545).
Fig 545 PICT-3547
53. Route the overfl ow hose up, through the front right
hand corner of the radiator frame assembly, to the
coolant fi ll overfl ow barb (Fig. 546).
Fig 546 PICT-3544a
54. Slide the overfl ow hose onto the barb on the radiator
cap fl ange (Fig. 547).
Fig 547 PICT-3690