Toro Diesel Z Master - Page 236

MOWER DECKS
7-13Z580/Z593/Z595 Diesel Service Manual
7
3. Remove the bearing shield (Fig. 731).
Fig 731 CLR DSC-2671
4. Remove the spindle housing from the spindle shaft
assembly (Fig. 732).
Fig 732 CLR DSC-2672
5. Remove the seal spacer from the top of the spindle
housing (Fig. 733).
Fig 733 CLR DSC-2673
6. Remove the seal spacer from the bottom of the
spindle housing (Fig. 734).
Fig 734 CLR DSC-2674