MOWER DECKS
7-36 Z580/Z593/Z595 Diesel Service Manual
7
2. Slide the electric PTO clutch onto the stub shaft (Fig.
817).
Note: Make sure the clutch stop bracket is in the
slot on the clutch.
4. Install the center clutch bolt, two spring washers,
and the clutch retainer (Fig. 819).
Note: The direction of the spring washers.
Fig 817 PICT-3615
Fig 819 clutch bolt retainer asm
5. Torque the center clutch bolt to 50 ft-lbs. (68 Nm)
(Fig. 820).
3. Apply thread locking compound to the center clutch
bolt threads (Fig. 818).
A. Clutch bolt C. Clutch retainer
B. Spring washer (2)
Fig 820 PICT-4006
Fig 818 PICT-3957a
A
B
C
To Next Page
Loading...
