MOWER DECKS
7-43Z580/Z593/Z595 Diesel Service Manual
7
14. Twist the clutch stop and install the end to the frame
bracket with 2 carriage bolts, 2 fl at washers, and 2
locknuts (Fig. 845).
Note: Make sure there is a twist in the clutch stop.
Fig 845 PICT-3973
15. Plug the clutch harness into the electric PTO clutch
plug (Fig. 846).
13. Route the PTO drive belt onto the clutch pulley.
Install the idler arm spring (Fig. 844).
Fig 846 PICT-3979 Fig 844 PICT-3969
16. Secure the electric PTO clutch plug and wires to the
frame crossbar with a cable tie (Fig. 847).
Fig 847 PICT-3988a
To Next Page
Loading...
